In front of me today I have the 1 300 dollar series. 3 Apple watch the one with the special red dot on the side.
This particular box contains the most premium version made from a sapphire screen and ceramic body, And because of these premium materials, the price jumps considerably compared to the 329 dollar base model.
Is it worth it And, more importantly, is Apple using pure sapphire on their watch.
This time around Or is it the same sratchable sapphire they put on their camera lenses? There’s literally only one way to find out Let’s get started.
The presentation inside this box is rather exquisite.
There is a definite premium feel emanating from the packaging.
The back of the watch lists it’s, build materials, sapphire and ceramic Pretty premium stuff Top of the line construction.
I purchased another pure sapphire, crystal Tissot watch to test as well, and I’ll.
The Mohs hardness scale has been used to differentiate between minerals for over 200 years.
With talc powder being a level 1 and diamonds being the hardest at a level 10, Every mineral has it’s place on the scale.
Normal glass is a 5 5, so we see most smartphones scratching at a level 6, since something can only be scratched by a material harder than itself.
Sapphire crystal like on one of Tissot’s, premium high end watches, scratches at a level 8 or 9, Even HTC managed to use real sapphire on one of their HTC.
U Ultra sapphire edition displays That was pretty impressive.
I’ve been slowly working.
My way around the numbers of the watch face with each corresponding Mohs pick finally reaching a level 6.
This is normally where we would see regular glass start.
Scratching. Sapphire should still be immune to this pick, but we start seeing permanent marks on the surface of the Apple watch.
The pure sapphire crustal on the Tissot watch is still impervious to the scratching.
I’ve even been wearing this watch for a while.
Now and there are zero blemishes, Let’s bump it up to a level 7 and see what happens, And yet we have another line.
On the sapphire crystal surface of the 1, 300 dollar Apple watch Sapphire, while a premium material is not exceptionally rare.
Nor does it need to be that expensive.
This Tissot watch only costs about 300 dollars, a 1 000 dollar price difference between the two And the sapphire.
On the Tissot watch gets no damage from the level 7 pick in the exact same lighting.
It looks pristine.
Finally, let’s take it up a notch to level 8, where sapphire should normally start to scratch, And here is another mark on the Apple watch, Giving Tissot a turn with the same level. 8 pick is where we finally start to get a reaction.
Damage has been done at a level 8 right where we would expect sapphire to be So.
What does this mean? Did Apple lie to us about their sapphire being sapphire Before we grab any pitchforks Apple’s not lying This tool, detects heat conductivity in gemstones, sapphire and diamonds being some of those gems And the display of this series.
3 Apple watch registers as a gemstone, which means that the sapphire is present the same way that this Tissot watch registers Glass, however, like on this iPhone 8 transfers heat differently and does not register as a gemstone.
This means that the Apple watch does have sapphire in it.
I tested the lens on my Galaxy S8, which is also made from glass, and it has no reading on the diamond selector tool, But the sapphire camera lens of the iPhone 8 does register.
So if the iPhone 8 camera lens and Apple watch screen are registering as sapphire, why do they scratch at an earlier level than they should? I studied a cross section of the camera lens under an electron microscope and made a whole video about this subject, which I’ll link in the video description of this one.
I found that the camera lens is made from aluminum oxide, which is sapphire, but has impurities while the Tissot scan came out as an aluminum oxide as well, but with no impurities.
So Apple is using sapphire but in my opinion it’s not as pure as it should be.
Hence the fracturing and the damaging that happens earlier than it should Checking. The ceramic body shows that it scratches at a level 8 in the bottom corner, but no marks were made with a level 6 pick in the top right or 7 in the bottom right.
So no issues with the ceramic.
It’s normal In all, honestly.
Apple’s version of sapphire is most likely more scratch resistant than regular glass.
It’s just not as scratch resistant as sapphire on the Tissot watch face or HTC’s sapphire screen on the Ultra.
I think the Apple watch is revolutionary and truly a fantastic invention legitimately shaping the future of wearables.
I’m not saying don’t buy the Apple watch, but you might be better off buying the base version as it does the same thing and save yourself.
A thousand dollars The stainless steel has sapphire in it as well at 600 dollars, just don’t buy it specifically for the sapphire.
It did occur to me that the permanent fractures that appear on the watch could be from the oleophobic coating that covers the surface of the screen.
When I’ve done my burn test on the 75 different smartphones on my channel, the flame always removes any oleophobic coating in the spot that’s burning. So, in theory, if the oleophobic coating is scratched and then evaporates, the marks should be gone.
As I remove the flame from the Apple watch, the marks remain and don’t rub off.
Oleophobic or not.
The marks are permanent, And here is the Tissot watch.
One more time in the exact same lighting and the exact same zoom on my camera, with no markings at a level 6 or 7.
So what do you guys thing about all of this? Let me know down in the comments and remember I’m, just one guy with one watch, but I have a pretty solid sample size of scratch, phones and watches on my channel And Apple 39.
S sapphire is just well unique.
The rubber seems to be legit, though Thanks a ton for watching, and I’ll see you around .